| Tolerance housing | H7 |
| D | 26 mm |
| Permissible sliding velocity v min. | 0.25 m/s |
| Coefficient of friction µ min. | 0.05 |
| Coefficient of friction µ max. | 0.1 |
| Permissible sliding velocity v max. | 5 m/s |
| Tolerance shaft | h8 |
| d | 20 mm |
| Specific dynamic load factor K | 10 N/mm² |
| Mass bushing | 0.022 kg |
Deep groove ball bearings - W 617/2
W 617/2. Dimensions. d, 2, mm. D, 4, mm. B, 1.2, mm. d1, ≈, 2.55, mm. D1, ≈, 3.45, mm. r1,2, min. 0.05, mm. Abutment dimensions. da, min. 2.5, mm. Da, max
Ball bearing plummer block units - sy 2. tf
Thread grub screw, G2, 3/8-24 UNF. Hexagonal key size for grub screw, N, 4.763, mm. Recommended tightening torque for grub screw, 16.5, N·m
Roller bearing pillow block units, for inch shafts
d2, 111.125, mm. A, 68.263, mm. A1, 95.25, mm. B, 92.075, mm. H, 165.894, mm. H1, 82.55, mm. H2, 57.15, mm. L, 265.113, mm. J, max. 223.838, mm. J, min
Roller bearing square flanged units, for inch shafts - FYE-2
da, 50.8, mm. d2, 73.819, mm. A, 57.15, mm. A1, 75.406, mm. A5, 27.781, mm. A6, 19.05, mm. B, 73.025, mm. a, 2.381, mm. J, 107.95, mm. L, 139.7, mm
LGHP 2 SKF high performance, high temperature bearing
SKF LGHP 2 is a premium quality mineral oil based grease, using a modern Polyurea (di-urea) thickener. It is suitable for electric motors and similar applications
LGWM 2 SKF High load, wide temperature bearing ...
SKF LGWM 2 is a synthetic-mineral oil based grease using the latest complex calcium sulphonate thickener technology. It is suitable for applications subjected
SKF High load food grade grease LGFQ 2
High load, water resistant and wide temperature food grade grease. ... SKF LGFQ 2 is a synthetic oil based grease using the latest complex calcium sulphonate thickener technology. It is suitable for applications subjected to high loads, wet environment and fluctuating temperatures